Show us your RV-10 Panel

[Shays]

Originally Posted by Bill.Peyton

After 1300 hours and almost 10 years, I finally decided it was time to move this panel into the future. Below are the "as built" photo and the newly upgraded photo. With the exception of the power system, this required a totally new harness. I'm looking forward to another 10 years of flying behind this great panel!

Beautiful setup!

[Dozer]

I would like to share about my experience with ordering an aluminum panel through Xometry. They have charged me around 300$ inculding a delivery fee from Mexico.

So, I just uploaded my STEP file of the panel, clicked the button Order and in 3 weeks later I received a panel. It was very easy. I really like the quality of their laser cutting and tolerance. All the holes on the panel have been designed with the tolerance +0.2 mm to the actual diameter of the switches, LEDs (every single item was measured with a caliper during engineering process... Don't TRUST the drawings provided by manufactures!!! ) And the actual diameters on the panel I received are exactly +0.3 mm

F1
F2
F3
IMG_8972
IMG_8962
IMG_8961
IMG_8973

[Everwild]

Originally Posted by Dozer

I just uploaded my STEP file of the panel, clicked the button Order and in 3 weeks later I received a panel.

Tim,
Nice work! Any chance you are willing to share your STEP file? Would make a great starting point for those of us looking to do a G3X. It looks like you've already gone through the trouble of sourcing the individual models, etc

I'm waffling between an Aerosport panel or a traditional panel. Would be fun to experiment and move things around.

Thanks,
David

[Dozer]

It's not the end. I haven't even started a bottom console, where I am going to place all other switches, engine controls.... etc.


It's just the base aluminum panel. And I am also going to attach a fiber carbon overlay panel. The reason I personally don't like Aerosport's panel - they look like old Toyota's dashboard and it's not possible to fit as many instruments.

I would love to share everything I have, but I don't know how to share a 150 mB file here.... The project has been made in Autodesk Inventor 2023, so I can make a ZIP archive or export it into single STEP file

Let me try the Google drive...

https://drive.google.com/file/d/1iXm...usp=share_link

Let me know if it doesn't work

[Everwild]

Originally Posted by Dozer

It's just the base aluminum panel. And I am also going to use a fiber carbon overlay panel. The reason I personally don't like Aerosport's panel - they look like old Toyota dashboard and it's not possible to fit as many instruments.

I would love to share everything I have, but I don't know how to share a 150 mB file here.... The project has been made in Autodesk Inventor 2023, so I can make a ZIP archive or export it into single STEP file

Let me try google drive...

Thanks Tim! A STEP file is a fairly common format that can be imported into a number of CAD programs. Question is whether or not it will maintain object groupings etc.

Google Drive works great if you get the share settings right.

[Dozer]

There are backplates and a template to drill holes

F4

[mike newall]

Heck.... It's Garmin.

Where does the Fishfinder go

[Dozer]

More parts just arrived. This time made in China.

IMG_9008
IMG_9009