Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
Yeah, no kidding! You and everyone else. I’m hoping there’s some scalpers outside the day of the banquet .😄 -
Here's the alternate method. Lots of ways to skin this cat. Cut a hole in the baffle, carefully deburr it, then make a spacer (0.065"... -
DDesert Rat replied to the thread Glare Shield edge guard/panel illumination.I just did simple door edge guard from Auto Zone or O'reilly. I have 2 LED strips under there. I couldn't honestly tell you if I can...
-
-
BBillWB707 replied to the thread RV-9A Engine mount replacement options.We are looking for anyone who has done this kit replacement to see what issues they had. also, since Van's told me they had to make one...
-
IIO390 replied to the thread Screwing into Aluminum.I’ve also had very good luck using helicoils (or off brand equivalent) to fix stripped 8-32 fairing screw holes on my RV. Lycoming use...
-
aeroaddict replied to the thread Shop Ideas.Looks nice. Organization and separation into categories up front saves a lot of time. Just like Larry, all the small completed... -
Sanch627 reacted to RV10inOz's post in the thread Increased cooling by blocking front two cylinders with
Like.
Just to play devils advocate. One thing I learned many years ago from John Deakin, Walter Atkinson, George Braly & Tim Roehl is you... -
D-Dubya replied to the thread Moving an 8.Wow! On a trailer at 80?? You've got a much bigger set than I do. Set of trailers, of course. 😁 -
Sanch627 reacted to Larco's post in the thread Increased cooling by blocking front two cylinders with Like.
Don?t forget that adding a washer between the rear baffle and # 3 cylinder at the # 8 screw attachment is a huge help. This allows air...
-
RWe had this happen on an RV12iS down here with the Dynon package AP package. It could also happen on Garmin I guess. We thought the...
-
D-Dubya replied to the thread Heat Muff Orentation.If all else fails, read the instructions that came with your heat muff. Yeah, I know, it breaks the Guy Code. ;) My muff instructions...
-
RV10inOz replied to the thread Stuck Trim Tab.We had this happen on an RV12iS down here with the Dynon package AP package. It could also happen on Garmin I guess. We thought the... -
Rrdockery_3 replied to the thread Stuck Trim Tab.I couldn't hear anything at first. I only started hearing a sound after it started working again and then proceeded to stop working...
-
Fenderbean replied to the thread Dynon opinions.I flew glass cockpit in the military so thats not an issue, I am just curios at this point the real differences between the dynon and... -
RV10inOz replied to the thread Increased cooling by blocking front two cylinders.100% Dan, and I love your post..... that is Post of the Year Award worthy. I am not at liberty to post pictures yet, nor too many...
