M5fly
Well Known Member
I'm getting ready to install a TruTrak ADI II autopilot and servos. I had Stein build the harnesses for me, my main question is how most folks decided to run the harness to the pitch servo. The harness has the servo plugs already connected and it seems like the obvious choice is running it down the left side through the bulkheads, but I certainly don't feel as though drilling a hole in the bulkheads big enough for the plug to fit through is a good idea, nor do I want to remove the plug and rewire it after routing the harness. I don't think routing the harness along the center of the floorboard all the way back is a great idea either since there currently aren't any wires running through there and has no existing housing to shield the wires from our feet.
Thoughts/tips/advice?
Thoughts/tips/advice?