After removing the K & N air filter from the top of the snorkel I noticed several of the perimeter rivet heads that attach the baffle to the snorkel were missing.
This is an IO-360M1B standard build with 400 airframe hrs. I've replaced all of the perimeter rivets and washers with No6 screws and lock nuts. I'm thinking the rivet heads went right on through the throttle body and into the plenum. Maybe all the way through the exhaust, too? Just wondering if anyone else has seen this happen.
This is an IO-360M1B standard build with 400 airframe hrs. I've replaced all of the perimeter rivets and washers with No6 screws and lock nuts. I'm thinking the rivet heads went right on through the throttle body and into the plenum. Maybe all the way through the exhaust, too? Just wondering if anyone else has seen this happen.