I installed my forward baggage floor with socket head cap screws and use a ball end allen socket on my 1/4 inch drive electric ratchet to install/removed them. Makes it a lot easer to take the floor in and out when needed.
Always think maintenance
I talked to "the man" at OSH about making it standard. By far the best mod I've done. Fuel pump, brakes, engine control cables, etc. are right there.I put one like that in my -8 too. Much easier to get to the fuel filter than crawling under the panel.
Looks very useful. After removing the forward baggage shelf several times for my regular inspections, I've gotten better at it, and don't dread it like I did the first few times. This mod would mostly eliminate that need.I talked to "the man" at OSH about making it standard. By far the best mod I've done. Fuel pump, brakes, engine control cables, etc. are right there.