A10Degen
I'm New Here
I'm on the rudder, its going as well as one can hope. Got to the R-710 and didn't trim all the way to avoid min distance issues, went to about halfway down the notch, seems to fit fine. The issues that I'm finding is in order to make the bottom rib line up nicely with the bottom row of holes on the skin, while lining up with the vert spar, the R-710 tracks forward on the bottom rib as shown by the 3 holes being off. If I cleco those holes and "force" the line up, the vertical spar twists slightly and will be under some tension when the skins are riveted/cleco'd on.
Let me know if I'm being a knuckledragger about this, cheers.
Let me know if I'm being a knuckledragger about this, cheers.