Dynon works a little differently. A single press of the Disconnect/CWS switch disconnects the AP. Press and hold the Disconnect/CWS switch while the AP is engaged puts the AP into the CWS mode, and the AP servos are temporarily disengaged. This lets you fly the airplane by hand for short periods to make an adjustment to the AP's targets without completely disengaging the AP. Release the switch and you're back in full AP mode.
Take a look at the SkyView Classic/Touch Pilot's User Guide starting on page 8-11 to see how the AP targets are adjusted for the "Simplified AP Mode" and the "Expert AP Mode" when the switch is released and CWS mode is disengaged.
You can also configure the Disconnect/CWS switch to engage the AP by holding the switch/button for a few seconds and then releasing the button when the "REL TO ENG" annunciation comes up in the Top Bar. I have this function enabled and like it.
Very useful functions for a button on the stick grip.