I was singin' the orange-peel blues after spraying the bottom of my RV8A fuselage with Deltron DCC Concept topcoat (over DP epoxy primer). So with nothing to lose I tried Dan Horton's Cut & Buff methodology using the 3M products he recommended: trizak 1500 wet color sand with DA sander followed by 2 stage buffing with electric buffer using the 3M #1 and #2 rubbing and machine polish compounds.
I am astonished - this stuff really works. My amateur paint job turned into something very acceptable. I highly recommend this for DIY painters wanting to achieve a near-professional finish.
Thanks, Dan, for posting this advice.
I am astonished - this stuff really works. My amateur paint job turned into something very acceptable. I highly recommend this for DIY painters wanting to achieve a near-professional finish.
Thanks, Dan, for posting this advice.