-4 is this a stock vans air filter?

[Rbb469]

Does anyone know if this is the stock air filter vans sells? TIA

 

[JonJay]

Does anyone know if this is the stock air filter vans sells? TIA

Sure looks like standard air box and filter.

 

[andoman]

Sure looks like standard air box and filter.

The filter no. is embossed on the rubber housing.
Check the actual dimensions of your filter to the KN specs. The filters shrink dramatically over time and get loose in the FAB. Poor sealing and FAB wear result. These filters in our service environment are definitely not “lifetime” filters.

 

[Rbb469]

The filter no. is embossed on the rubber housing.
Check the actual dimensions of your filter to the KN specs. The filters shrink dramatically over time and get loose in the FAB. Poor sealing and FAB wear result. These filters in our service environment are definitely not “lifetime” filters.

Thanks! Will do. Ricky

 

[Rbb469]

Sure looks like standard air box and filter.

Thanks

 

[fixnflyguy]

Looks like the standard K&N set up I have in mine. The earlier versions like yours and what I have keep the filter suspended above the airbox bottom surface. I think newer ones "sandwich" the filter against a plate bonded to the airbox. My original filter hasn't shown any sign of shrinking, but I've heard of that happening. I dont have a handy picture close up.

 

[Rbb469]

Looks like the standard K&N set up I have in mine. The earlier versions like yours and what I have keep the filter suspended above the airbox bottom surface. I think newer ones "sandwich" the filter against a plate bonded to the airbox. My original filter hasn't shown any sign of shrinking, but I've heard of that happening. I dont have a handy picture close up.

Thanks for the info. What a clean setup have. How much time do you have on your eng/airframe?

 

[fixnflyguy]

Thanks for the info. What a clean setup have. How much time do you have on your eng/airframe?

Thanks for the compliment. I've only got about 450 hrs on it. I built it, and tried to finish it out well and keep it clean.

 

[tass]

In case you're looking for a model number, mine fit a K&N E-3322 without having to be modified.

 

[AlphaCharlieBravo]

Looks like the standard K&N set up I have in mine. The earlier versions like yours and what I have keep the filter suspended above the airbox bottom surface. I think newer ones "sandwich" the filter against a plate bonded to the airbox. My original filter hasn't shown any sign of shrinking, but I've heard of that happening. I dont have a handy picture close up.

Bill
That is a beautiful looking engine install.
A

 

[Rbb469]

In case you're looking for a model number, mine fit a K&N E-3322 without having to be modified.

Thank you!