If I receive a weak transmission, I can hear ignition noise in my headset, which makes it difficult to copy the incoming transmission.
I have discovered that the noise disappears if I switch the mags to R. On the Left mag, there is noise.
I've checked the harness out with a tester, and a megger. Moved the plugs from left mag to right mag, and the noise stayed with the Left mag.
The P-Lead Shield is grounded only at the Mag end. All connections look good.
Have tried 3 headsets, same result. Passenger hears the same thing.
The Slick Mags are both relatively low time. This is not a new issue, I'm just finally getting around to tackling it.
Looking for ideas from the gurus....
I have discovered that the noise disappears if I switch the mags to R. On the Left mag, there is noise.
I've checked the harness out with a tester, and a megger. Moved the plugs from left mag to right mag, and the noise stayed with the Left mag.
The P-Lead Shield is grounded only at the Mag end. All connections look good.
Have tried 3 headsets, same result. Passenger hears the same thing.
The Slick Mags are both relatively low time. This is not a new issue, I'm just finally getting around to tackling it.
Looking for ideas from the gurus....