Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
BI bought a 2007-build RV-9A in November. I had a friend who has built four Vans aircraft help me with my first oil change and we found...
-
-
Skykingbob replied to the thread New Product - Inlet scoop from HP Aircraft.Beautifully done Steve! 👍🏻👍🏻👍🏻 -
Ironflight replied to the thread Elevator trim.I have seen numerous times when the relay clicks but voltage does not get to the servo. Relays are WAY cheaper than the servos, so if I... -
Skykingbob reacted to scsmith's post in the thread New Product - Inlet scoop from HP Aircraft with
Like.
New Product announcement! As a complement to our Ram-Air Intakes, we now have an inlet scoop available, so that you don't have to make... -
Carl Froehlich replied to the thread Elevator trim.Disconnect and use a couple of alligator clips connect direclty to the servo using a 9-12vdc battery. This will: - Identify relay... -
Eeison replied to the thread Fuel Pressure issue.I think I may have misspoke. I have the andair valve that is plumbed for left right center. 20x7T I believe it is. I said duplex...
-
KKaos2800 replied to the thread Elevator trim.Thank you
-
That assumes you buy into the red fin mumbo jumbo. Lyc doesn’t. They recommend running at 50 -150 rop or peak, both of which are in... -
ZZbuilder801 replied to the thread Anyone Ever Buy From Here?.I have another site I'd like to know if anyone has ever used or know if it's legit or a scam. https://ecaviation.com/ What I'm...
-
bjdecker replied to the thread Elevator trim.There's only one T3-12A. And despite it being marketed as "an exact replacement" for the MAC -8A on various sites (Spruce), I recall...
-
SFrom my experience small leakage in pitot is not something to worry about. There is an unlimited amount of air to compensate for the...
-
dmattmul replied to the thread LOP dilemma.Since l’m located pretty much at sea level and like to go LOP “soon” after takeoff (to keep my CHT’s below 400, PV IO540) I “respect”... -
Sskirting_virga replied to the thread LOP dilemma.There are a lot of shortcuts I get to take cruising up high. I basically never worry about "red box" or "red fin", even with high...
-
Thanks everyone! Georgetown looks like a good choice.
-
KI’m troubleshooting an elevator trim issue and looking for some insight. The trim works normally in the down direction, but up trim is...
