Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
Bill.Peyton replied to the thread GPS Repeater.I believe that this is the one that I have. I found that you have to close the hangar door and have the receiving antenna far away from... -
Van's Aircraft replied to the thread CN-00168.Louise is right. We had technicians working on our fiber yesterday, which caused a glitch in the sync to the cloud server housing the... -
A@Walt One thing I did learn from JB at TCM, they used to release higher DP numbers but eventually capped them at 195HP. This despite...
-
Sam Buchanan replied to the thread RV6A too slow!.Above 7500' DA you won't be able to exceed 75% power, no need for calculations. That is why we are telling you to run wide-open throttle... -
After takeoff it seemed like a very isolated misfire. Didn’t notice an immediate change in egt’s . I’m using the GRT EIS , so I had to... -
mburch replied to the thread Countersunk pull rivets for nutplate?."No tire kickers, I know what I got!" -
-
BBavafa replied to the thread G4X: Connecting the Dots.How about we switch the conversation to rumors about capability and offerings. From what I have gathered, it will be offered with the...
-
ICan't wait for the flat earthers to chime in here. Anywho, please let the next Vans design use pulled rivets and be designed around the...
-
Louise Hose replied to the thread CN-00168.I've been in correspondence with someone at Van's and they (now?) know about the problem. Apparently a glitch in the loading of the new... -
Louise Hose replied to the thread KAI general thoughts - for those with Van's influence.I've been in correspondence with someone at Van's and they (now?) know about the problem. Apparently a glitch in the loading of the new...
-
DIf the supply chain did in fact dry up, they very well could be holding that last batch specifically for service inventory.
-
BI have built my own and a couple others, so not necessarily what you are looking for. As paul said, you should just ignore that. I am...
-
Way back in the day (when dinosaurs roamed the earth) when we located, drilled & riveted all of our own holes, on situations such as...
-
BI don’t build engines for a living, but I have built them for my own (and a few for others) use, so take this for what its worth...
-
Ironflight replied to the thread Countersunk pull rivets for nutplate?.Boy, I’ve got a couple of bins of those that I picked up at a fly-market or Oshosh vendor years ago. At the current prices, I’m moving...
