Van's Air Force
The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!
Latest activity
-
newt replied to the thread WDYDWYRTW? Jun 6-7, 2026..Australian long weekend: I flew from Sydney/Bankstown to Stonefield YSFG near Adelaide for the 50th anniversary of The Adelaide... -
-
I got an email from Van's on 4/10. It was discussed in a thread here on VAF at some point but I don't have a reference for that. -
TTShort replied to the thread RV-15 Aileron Observations.I got an email from Van's on 4/10. It was discussed in a thread here on VAF at some point but I don't have a reference for that.
-
Jonnyb replied to the thread GPS antenna placement on an -8.I think most have them under the cowl on the fire wall or on the back behind the passenger seat. From reading many of these threads... -
The manual states the battery needs to be grounded directly to the engine. No more X’s since adding that -
TTheNewGuy replied to the thread Red Cube Wiring.The manual states the battery needs to be grounded directly to the engine. No more X’s since adding that
-
Easy, it is pretty close if you do nothing. But add a washer on each of the screws on the “down” side of the fuselage between the... -
Dan 57 replied to the thread Not again 😔 stuck valve.which, if the reamer is an adjustable one and is properly adjusted, less aggressive since it won't remove any of the guide's material... -
rv8ch reacted to daviid's post in the thread Cellular data no longer working when airborne with
Like.
ive built cell sites for 20 years. we put downtilt on antennas to optimize to ground. lower frequency bands will travel further than... -
pazmanyflyer replied to the thread Smoke puffs on rollout/taxi.Where did you get 1 qt for 4 hours? It’s 1/2 qt over the last 4 hours. 1/4 qt for each 2 hour flight. That’s what I’ve recorded for the... -
-
I've been flying with the camera on pretty much every flight now and the top of the VS is by far the best vantage point for good clear...
-
BTT Airframe, less than 75. Engine Major O/H less than 75 Hrs, IO360 A4M Catto 3 blade, Fixed Pitch SDS F.I./Ignition Trig Avionics...
-
-
evan.flatt replied to the thread WTB MGL MX1.I have new MX1s and MX2s as well as a used MX1 received from a customer who swapped it for an MX2.
-
The MGL RDAC is different than some and is intended to be grounded at the engine block and only at the engine block...
-
evan.flatt replied to the thread Red Cube Wiring.If you are getting a red X on EMS items your problem is a communication issue with the RDAC. Red Xs are an indication of loss of...
