Yoke For "Finishing" Trailing Edge Rivets ...

[HFS]

I made this way back in 2009 as a way to uniformly squeeze the trailing edge wedge rivets in the rudder & elevators on the -10 I was building at the time (sold it).

The lower "foot" is adjustable in case your trailing edge is not exactly the same as the plans.

YMMV - but this does work ...

HFS

 

[Dr_Dave_MT]

I made this way back in 2009 as a way to uniformly squeeze the trailing edge wedge rivets in the rudder & elevators on the -10 I was building at the time (sold it).

The lower "foot" is adjustable in case your trailing edge is not exactly the same as the plans.

YMMV - but this does work ...

HFS

Envious of the “stack of dimes”

 

[JonJay]

Very ingenious tool. Separating us humans from animals again.