N941WR
Legacy Member
I was following Bob's figure Z-33 (Rev -K- 04/20/05) to wire my P-mags and realized there may be some issues with the diagram.
The first being that EmagAir now recommends using 18 AWG wire for the power and ground leads. The second being that Bob references wire colors for the Pmag which are not there on the new mags.
Could someone who has exeperiance with these things take a look at the attached drawing and let me know if my diagram is correct?
[edit 6/17/07] The diagram posted here has been superseded, see post #8 below. [End of edit]
Thanks for the help!
The first being that EmagAir now recommends using 18 AWG wire for the power and ground leads. The second being that Bob references wire colors for the Pmag which are not there on the new mags.
Could someone who has exeperiance with these things take a look at the attached drawing and let me know if my diagram is correct?
[edit 6/17/07] The diagram posted here has been superseded, see post #8 below. [End of edit]
Thanks for the help!
Last edited: