Wing root rubber U edging

[Piper J3]

The flying RV-12 I just purchased has a gap between the the wing root and the fuselage. I'm considering adding a rubber U channel to fill the gap. See http://www.ebay.com/itm/1-32-Rubber...ash=item51b454a8d4:g:hWcAAOSwPe1T6jD-&vxp=mtr or perhaps this http://www.ebay.com/itm/321864818249

Any other suggestions?

 

[Slane]

Van's provided a wing root foam rubber seal with the kit and you should have received it. Works very well!

 

[RFSchaller]

I put U-channel on mine. I'm very pleased with it.

 

[JBPILOT]

Happy with this - -

 

[Dave12]

It does look good.

 

[Shadetree]

Source and part number for the u channel? I need some before next inspection.
Thanks

 

[kritsher]

I used this stuff and am pleased with it:

http://www.mcmaster.com/#8507k41/=zisv3l

I used some black RTV to make sure it stays in place

 

[pazmanyflyer]

Wing root channel

Source and part number for the u channel? I need some before next inspection.
Thanks

RUBBER CHANNEL X 12' Wing Root Channel

http://vansaircraft.com/cgi-bin/store.cgi?ident=1445241827-132-609&browse=hardware&product=misc

 

[JBPILOT]

What I used - -

http://www.aircraftsupply.com/ta-11-black.html

 

[Shadetree]

Thanks for the info.

 

[Jackkclark]

Wing Seal

How many feet of the U-Channel wing seal does it take TOTAL for both wings.

 

[DaleB]

I bought a 25' length. It was enough for both wings, with several feet (I didn't measure it) left over. I bought McMaster P/N 8507K41.

 

[vfrazier]

We carry a quality U-trim piece. Sold by the foot. $1.25/ft.

It is what I used on the Rocket and it never moved at all, even with no adhesive. It has a slightly tacky feel to it that gives it a good grip on the wing root aluminum.

Highly recommended. And it's cheaper than most other options, and you don't have to wonder if it's the right stuff or not!

http://www.flyboyaccessories.com/Flightseal-U-Profile-Edge-Trim-p/2306.htm

 

[waterboy2110]

http://www.aircraftsupply.com/ta-11-black.html

Can I get this in white?