Champ
Well Known Member
Trial fit on wings went real well. Used hardware store bolts (5 thou under) with a generous taper ground down on their ends as well as polishing the shanks on a scotch brite wheel. Applied Boelube on mating surfaces and bolts. Tapped them into place. I will use the same at final install and switch out one at a time for close tolerance bolts.
Lots of help made the job easy. L-R - Ben, Fred, Paul, Me, son Tom (a great help all along and fellow pilot/builder) and grandson Jack (future pilot).
Lots of help made the job easy. L-R - Ben, Fred, Paul, Me, son Tom (a great help all along and fellow pilot/builder) and grandson Jack (future pilot).