Windscreen Installation: comments welcome

[Aiki_Aviator]

Yesterday I completed the installation of my front windscreen and as I stood back to admire my good work I noticed something a little a miss. It looked distorted.

After some careful examiniation, it looks like the windscreen is not as semetrical as I expeced and as such there appears to be a more bulbouse section to the screen and it appears to be a little "wonky" (i.e. technical term)

Can people let me know if this is normal? Have I basically stuffed it up?

All comments welcome.

Looking down from the top:

From the front:

 

[Bill.Peyton]

Andrew,
I am not sure I see what you are describing. The Vans provided windscreen is a little distorted from the get-go. The lower edge rear right side has a tendency to protrude wider than the left, but that is easily taken care of during the body work process.
Bill

 

[ReidVaitor]

warped windscreen

Bill is right. The bottom right has a bulge. This is normal for a Vans windscreen. For someone who still needs the windscreen get it from Desser http://www.vansaircrafttires.com/categories/RV%2d10/Airframe-Parts/.
It is a perfect fit from delivery.