Ok all you sherlocks out there. A question.
I noticed that at certain times, the needles on my altimeter, VSI, and ASI oscilate a bit. Sometimes more than others and at different altitudes. This leads me to believe that somehow the static system is involved.
One elimination - the static port system are the round aluminum disks that are riveted in and the lines are hard nylon with nyloseal connectors. Not the Vans rivets Port locations are the same as Van's.
Another elimination (maybe) Static system checked and certified to 20,000 feet with no leaks. Also the AP holds altitude very nicely.
Another elimination (maybe) No excessive vibration and smoother than other planes I have been in.
Could it be prop wash?
I noticed that at certain times, the needles on my altimeter, VSI, and ASI oscilate a bit. Sometimes more than others and at different altitudes. This leads me to believe that somehow the static system is involved.
One elimination - the static port system are the round aluminum disks that are riveted in and the lines are hard nylon with nyloseal connectors. Not the Vans rivets Port locations are the same as Van's.
Another elimination (maybe) Static system checked and certified to 20,000 feet with no leaks. Also the AP holds altitude very nicely.
Another elimination (maybe) No excessive vibration and smoother than other planes I have been in.
Could it be prop wash?