Italiancowboy
Active Member
So bought a 10 and noticed the main wheel pants have a good 1/2” or so movement up/down pivot due to bracket that holds the pants is not fully tight (bolt with tubular spacer then lock nut- so nut is tight on bolt but not so tight as to keep bracket from moving)
Is this normal? Is there supposed to be some play there so the pant/bracket moves vs busting the fiberglass?
I had a 6 and the pants were firmly in place.
Is this normal? Is there supposed to be some play there so the pant/bracket moves vs busting the fiberglass?
I had a 6 and the pants were firmly in place.
Last edited: