JwWright57
Well Known Member
Man these wheels are really a PIA lol
First i had them assembled incorrectly, valve was pointed towards the inside of the rim. Changed it around and all was good.
Checked the toe/in out with the string and blocks the alignment was perfect, wont need any shims.
Went to put the wheels on and the bolts holding the axles to the gear leg rub against the inside bearing. See picture. I added a third washer on the backside and that pulled the bolt out enough so its not rubbing. Anyone else have this problem?
https://photos.app.goo.gl/tA5uHgqUk1mZpYQd6
Also just noticed the washers under the axel nut are missing. The were supposed to come with the break/tire kit according to the plans. Just one more fing thing to resolve. I'm guessing I'll have to contact Matco for those
First i had them assembled incorrectly, valve was pointed towards the inside of the rim. Changed it around and all was good.
Checked the toe/in out with the string and blocks the alignment was perfect, wont need any shims.
Went to put the wheels on and the bolts holding the axles to the gear leg rub against the inside bearing. See picture. I added a third washer on the backside and that pulled the bolt out enough so its not rubbing. Anyone else have this problem?
https://photos.app.goo.gl/tA5uHgqUk1mZpYQd6
Also just noticed the washers under the axel nut are missing. The were supposed to come with the break/tire kit according to the plans. Just one more fing thing to resolve. I'm guessing I'll have to contact Matco for those