what is "a turn" ?

[dbhill916]

Hi all,

I'm getting ready to do the 200 hr inspection on my carbs and there are several references to adjusting screws by a certain number of turns. This is not a clear instruction to my mind.

Is 1 turn = 180 degrees or 360 degrees?

Thanks in advance,
-dbh

 

[PaulvS]

360

One full turn is 360 degrees.

 

[Mel]

One turn is 360°. 180° would be a half turn.

 

[dbhill916]

thanks for the fast replies!

-dbh