What did you do for this rivet on the aileron gap seal

[RVFan671]

Im working on the wings and installing the flap and aileron gap seals to the rear spar. I am not willing, at least right now, to try and buck the 4-5 rivet due to it basically being behind this stiffeners on the aileron inboard mount bracket stiffener. I am thinking I can just use a cherry max, but what is the exact size of cherrymax I should use? I think the LP 3-4 would work except since it goes through the doubler im worried it wont be acceptable.

 

[Richard Connell]

Yep cherrymax. Sorry can’t remember what size though. I had one go and decided the second attempt wasn’t going to be any better.
I only have one grainy photo.

 

[danlh]

I would also be interested in what size cherrymax rivet. I need to drill out my failed bucking attempts.

 

[RVFan671]

I would also be interested in what size cherrymax rivet. I need to drill out my failed bucking attempts.

I know there is a slight oversized cherrymax for this very situation when youve already had a rivet expanded in there. In my case its a clean #30 hole.