roadrunner20
Well Known Member
I'm getting a weak transmit on my comm and need some assistance in troubleshooting the system.
Equipment:
ICom A200
Flightcom FC-130 intercom.
Commant Bent whip 122
Receiving communications is fine.
The transmit seems to be degrading over time.
I've checked my grounds and all seems well.
The antenna mount is clean strong.
I suspect my coax cable center lead has a weak connection on the connection side at the rear 90* connection to the A200.
I remember this as being suspect when I installed it.
The multi-strand conductor had to be soldered into a slotted bushing.
Am I on the right track here?
Equipment:
ICom A200
Flightcom FC-130 intercom.
Commant Bent whip 122
Receiving communications is fine.
The transmit seems to be degrading over time.
I've checked my grounds and all seems well.
The antenna mount is clean strong.
I suspect my coax cable center lead has a weak connection on the connection side at the rear 90* connection to the A200.
I remember this as being suspect when I installed it.
The multi-strand conductor had to be soldered into a slotted bushing.
Am I on the right track here?