Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs?
KC10FE Member Aug 8, 2018 #1 Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs?
johnbright Well Known Member Friend Aug 8, 2018 #2 Does one need a jig? KC10FE said: Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs? Click to expand... Curious, isn't the wing self-jigging; pre-punched skins and sub-structure.
Does one need a jig? KC10FE said: Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs? Click to expand... Curious, isn't the wing self-jigging; pre-punched skins and sub-structure.
KC10FE Member Aug 8, 2018 #3 Wing jig If you follow the recommendations by Vans.......then yes! The jig insures that you don?t build any twist in the wing. Even though the kit is pre-punched, there is plenty of room for error.
Wing jig If you follow the recommendations by Vans.......then yes! The jig insures that you don?t build any twist in the wing. Even though the kit is pre-punched, there is plenty of room for error.
ksdflying Well Known Member Friend Aug 9, 2018 #4 I second this. Absolutely build a wing jig. level it in, square it in, and plumb-bob it. No question about it.
I second this. Absolutely build a wing jig. level it in, square it in, and plumb-bob it. No question about it.
H herb.b Member Aug 9, 2018 #5 wing jig I have a set that I am done with. They are looking for a new home to be used again. I am in central Illinois.
wing jig I have a set that I am done with. They are looking for a new home to be used again. I am in central Illinois.
jcarne Well Known Member Patron Aug 9, 2018 #6 I just ran posts from floor up to the trusses and clamped the spars. I'm guessing your in a finished garage and need the steel ones to the floor. 20180330_150211 by Jereme Carne, on Flickr
I just ran posts from floor up to the trusses and clamped the spars. I'm guessing your in a finished garage and need the steel ones to the floor. 20180330_150211 by Jereme Carne, on Flickr
wirejock Well Known Member Aug 9, 2018 #7 Google group KC10FE said: Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs? Click to expand... Eric Post to our group. Bob has the set I built. He may be finished with wings.
Google group KC10FE said: Does anyone have a steel floor mounted wing jig they want to get rid of? I am in Colorado Springs? Click to expand... Eric Post to our group. Bob has the set I built. He may be finished with wings.
KC10FE Member Aug 9, 2018 #8 Wing jig Thanks gentlemen! Herb....how much do you want for them? Cost for shipping? Larry....I will check with our group as well.....thanks again guys!
Wing jig Thanks gentlemen! Herb....how much do you want for them? Cost for shipping? Larry....I will check with our group as well.....thanks again guys!
SeanB Well Known Member Aug 10, 2018 #9 Rolling stand Erik, When you get the wings finished, I’ll have a rolling wing stand if you want it. http://www.kitlog.com/photos/project_2420/full/FP26052015A0001H.jpg Last edited: Aug 10, 2018
Rolling stand Erik, When you get the wings finished, I’ll have a rolling wing stand if you want it. http://www.kitlog.com/photos/project_2420/full/FP26052015A0001H.jpg
H herb.b Member Aug 10, 2018 #10 KC10FE said: Thanks gentlemen! Herb....how much do you want for them? Cost for shipping? Larry....I will check with our group as well.....thanks again guys! Click to expand... I just want them to be in a new home. I can check on shipping but I expect it not to be cheap. They are heavy.
KC10FE said: Thanks gentlemen! Herb....how much do you want for them? Cost for shipping? Larry....I will check with our group as well.....thanks again guys! Click to expand... I just want them to be in a new home. I can check on shipping but I expect it not to be cheap. They are heavy.