8MikeXray
Well Known Member
I have a VPX that is showing 2.9 volts on pin J1-2 that is set up to provide a high discrete signal (Boost Pump on) to my G3X. This voltage is present even though all of the current faults are selected off. The GSU73 sees this voltage and thus the G3X considers the high discrete active. I have checked other VPX outputs and they to also show the 2.9 volts. I understand that the 2.9 volts is present to allow the option of seeing a current fault, if selected, on a device.
How do I get an active high to work in this situation with the G3X?
Thanks
How do I get an active high to work in this situation with the G3X?
Thanks