N42AH
Well Known Member
I have an RV-10 with VP-200 that I acquired.
We have questions about VP-200 configuration so we reached out to Chad Jensen over the weekend, but he responded this morning that he is unable to help with any VP-200 questions or issues.
So here goes...
I am trying to add 4 electrical devices to the current configuration. One is a new cowl landing light from Aerosports Products, 2 panel mounted USB connectors and power for my APRS tracker.
Thinking the landing light would be the easiest and quickest to get our feet wet in trying to learn how the configuration for the VP-200 goes we jumped head first.
On our spread sheet we had an empty spot on J6 pin 7 which was listed as unused. When we went to confirmed it we weren't able to select pin 7. We went from pin 6 and it then jumped to pin 9.
So my first question is when it says unused on the spread sheet would that mean it is unavailable for usage or has not been turned on/configured for usage?
Second question, as we scrolled thru the device configuration there were several devices listed but not were configured. Some were on the default list and some were not. Is it OK to just delete the devices that aren't on the default list to clean things up?
Third question is their a method or madness in selecting which connector to assign a device too? For the landing light above we just choose J6 because it has an empty space. Was that correct or what?
Also Chad said that there was a group of VP-200 owners trying to organize support for the product...where do I find these fine people?
Thanks
We have questions about VP-200 configuration so we reached out to Chad Jensen over the weekend, but he responded this morning that he is unable to help with any VP-200 questions or issues.
So here goes...
I am trying to add 4 electrical devices to the current configuration. One is a new cowl landing light from Aerosports Products, 2 panel mounted USB connectors and power for my APRS tracker.
Thinking the landing light would be the easiest and quickest to get our feet wet in trying to learn how the configuration for the VP-200 goes we jumped head first.
On our spread sheet we had an empty spot on J6 pin 7 which was listed as unused. When we went to confirmed it we weren't able to select pin 7. We went from pin 6 and it then jumped to pin 9.
So my first question is when it says unused on the spread sheet would that mean it is unavailable for usage or has not been turned on/configured for usage?
Second question, as we scrolled thru the device configuration there were several devices listed but not were configured. Some were on the default list and some were not. Is it OK to just delete the devices that aren't on the default list to clean things up?
Third question is their a method or madness in selecting which connector to assign a device too? For the landing light above we just choose J6 because it has an empty space. Was that correct or what?
Also Chad said that there was a group of VP-200 owners trying to organize support for the product...where do I find these fine people?
Thanks