With Alcohol ???Problem would be the chems to remove it later.
Problem would be the chems to remove it later.
With Alcohol ???
Scotches, Gins, Vodkas, Tequilas,... yes, there's a lot of different alcohol choices around...There are literally dozens of different alcohols (and blends thereof)....and nearly all of them will exacerbate cracking in a perfectly good acrylic canopy in short time. You can use isopropyl alcohol if it is guaranteed 100% pure....or you can use kerosene. Not much else is really safe. The problem is that the products that are truly safe to use on acrylic don't tend to be very effective at removing adhesive residue. So I wouldn't go there.
3M 1080 I removed from canopy left no residue
Scotches, Gins, Vodkas, Tequilas,... yes, there's a lot of different alcohol choices around...
I was obviously talking about rubbing/isopropyl alcohol.
Best then, the 99.9% version.
I did not know that kerosene is ok???...!!!
What about applying the Sika Primer to the inside of the canopy (if I understand your need correctly)? Makes a nice Targa look. Obscures view of the roll bar.