Bryan Wood
Well Known Member
Hello all,
I'm having a recurring issue with the exhaust hanger on the pilot side on my 9A slipping. The rubber hose will not hold tight enough on the metal tubes to keep the exhaust from sagging on this side over the course of 25 hours or so. The other side is fine and never slips. I've tried using 2 hose clamps at both the top and bottom of the rubber hose and it still slips in time. I'm now thinking about putting some kind of adhesive onto the tubes and then using hose clamps to try and remedy this. Has anybody else had this issue and what makes it better. It's one of those things where the cowl has to be pulled to fix it and it is getting to be pretty irritating.
Regards,
I'm having a recurring issue with the exhaust hanger on the pilot side on my 9A slipping. The rubber hose will not hold tight enough on the metal tubes to keep the exhaust from sagging on this side over the course of 25 hours or so. The other side is fine and never slips. I've tried using 2 hose clamps at both the top and bottom of the rubber hose and it still slips in time. I'm now thinking about putting some kind of adhesive onto the tubes and then using hose clamps to try and remedy this. Has anybody else had this issue and what makes it better. It's one of those things where the cowl has to be pulled to fix it and it is getting to be pretty irritating.
Regards,