Two questions

[JohnF]

Because a dialup connection takes soooo long, here's two questions at once:

1. Are the three "non-white" wires from the AST servo used for anything in the Dynon?

2. What's in the finish kiit? I thought I saw that once but cannot locate it again.

Thanks.

 

[JBPILOT]

Not sure, but . . . .

1. Assume some wires are for future AP. ( my guess ).
2. Some of the things - Cowling, engine mount, canopy, landing gear, wheels / brakes, wiring harness, fuel tank & related, seats & belts, I think tunnel covers & related.

Might be more or less. Hope this helps.

John Bender

 

[Vagabond 11]

white wires

IT YOU'R TALKING THE TWO WHITE WIRES IN THE TALL CONE, THEY ARE FOR THE TRIM SERVO DRIVE AND THE TO BE ADDED TRIM TAB SYSTEMS. THESE DRIVE THE SERVO AND DOSN'T MATTER IF THEY ARE CROSSED. JUST WHITE TO WHITE. THE REMAINING WIRES ARE FOR THE INDCATOR AND THE HOOK UP IS IMPORTANT.

 

[Fl Mac]

Add, Engine mount and fiberglass tail cone to the list. Some early shoppers got the fiberglass with the tail kit.