Lycosaurus
Well Known Member
It was interesting to hear on another thread, that some people did not match drill and deburr their parts, but went straight to dimpling and riveting. Maybe this poll will give us a glimpse as to the percentage or number of builders that went that route.
I, because I am me, match drilled, deburred, dimpled, washed, etched, alodined, and applied 2 part epoxy primer everywhere. I feel so foolish
I would be interested to hear from those that did not match drill/deburr, to see how many hours they have on the airframe, and if any cracks (or other related issues) have propagated from those holes.
Please, no flaming .... just the facts.
I, because I am me, match drilled, deburred, dimpled, washed, etched, alodined, and applied 2 part epoxy primer everywhere. I feel so foolish
I would be interested to hear from those that did not match drill/deburr, to see how many hours they have on the airframe, and if any cracks (or other related issues) have propagated from those holes.
Please, no flaming .... just the facts.
Last edited: