swisseagle
Well Known Member
Hello
There is a lot here about sealing to read. In the section 5 of the Vans Manual, they also stated to use Tite Seal for zhe NPT. But I could not found information about which Tite Seal I should use. ACS sells both,:
- Tite Seal Light Weight
- Tite Seal Medium Weight
Which one should I use, let say for the fittings on a oilcooler, tank drain, fuel sender and so on.
I assume the light weight will be more liquid and may be is more for small fittings and small gaps.
Thanks alot and best regards,
Dominik
There is a lot here about sealing to read. In the section 5 of the Vans Manual, they also stated to use Tite Seal for zhe NPT. But I could not found information about which Tite Seal I should use. ACS sells both,:
- Tite Seal Light Weight
- Tite Seal Medium Weight
Which one should I use, let say for the fittings on a oilcooler, tank drain, fuel sender and so on.
I assume the light weight will be more liquid and may be is more for small fittings and small gaps.
Thanks alot and best regards,
Dominik