Van's Air Force

The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!

The VAF News - 4.3.2025. #6311. O-360 For Sale. Pretty much turnkey...

DeltaRomeo

doug reeves: unfluencer
Staff member
A nice lunch out at 52F Wednesday with some of the retired SWA pilots and mechanics. Four RVs in the background, deer chili, green chili stew, shrimp gumbo, key lime pie and cherry crumble. Not exactly the worse lunch, and GREAT conversation.
Hope you have a wonderful Thursday.
v/r,dr
Screenshot 2025-04-02 at 3.58.26 PM.png

dr (for a friend)
Screenshot 2025-04-02 at 3.49.54 PM.png


SingleTrax
Screenshot 2025-04-01 at 9.24.25 PM.png


RE: SL-00085 Flap Actuator Upgrade
…scsmith Q. Jonnyb A.
Is there an equivalent drawing for the RV-8? And I am puzzled by ATC_RV8OR's comment about it also being an aileron hinge?
Screenshot 2025-04-02 at 11.20.37 AM.png


Mothership
Screenshot 2025-04-01 at 4.30.55 PM.png


RE: Auxiliary power connection
…Richard Connell
I have an Anderson plug for each battery. 2 x PC680s.
Never needed to jump but I’m sure that one of those mini Li power packs would do it. The battery is only about 12” of 8AWG away.
I use these for charging rarely but quite often for hangar flying.
Screenshot 2025-04-02 at 11.21.50 AM.png

…John Retief
Here is what I came up, after careful consideration . I wanted access from outside the aircraft . It must be safe ,one can only imagine what will happen if the two poles touch each other in mid air ( the Anderson plug that some suggested is not safe according to me). So I decided on the plugs used on invertor welders which is widely available and cheap. The placing is just under the main solenoid. In the aircraft I only carry 2 short male leads, which can be connected to a charger or jumping cables. When not in use you push 2 rubber grommets into the holes. All comments welcome.
Screenshot 2025-04-02 at 11.22.34 AM.png


RE Wheelpants …DanH
Finish it all before you fly it. Everything. Even if it doesn't fly straight, diagnosis merely means removing the finished pants for one flight.
Fit the pants on the bench, early in the build, and you'll save a whole lot of crawling around.
Screenshot 2025-04-02 at 3.35.50 PM.png


OFF TOPIC:
IMG_7156.JPG

Get your VansAirForce.net Charity Cap!

Please consider donating yearly to help keep this American 1-person pirate ship afloat:

Older issues of the ‘VAF News’ can be found at:

THE VAF LIST (a list of RV-related lists)
 
Last edited:
Back
Top