Van's Air Force

The definitive Van's Aircraft support community! Buying, building or flying an RV? Join our exclusive family of mentors and enthusiasts!

The VAF News - 11.20.2024. #6218. C/S Prop MX, GTX, Gear Fairing, New Smoke Tanks Offered

DeltaRomeo

doug reeves: unfluencer
Staff member
RE: Hartzell prop governor not working with MT Propeller
…Richard Connell PIREP
I may be able to dig it out of the original engine log files. I do have all of it saved down.
I couldn’t be sure. But I feel like more than 2 but less than 5.
...What you could also try is removing the governor and installing a blanking plate over the pad with one hole. Then use shop air to pressurize the circuit to move the blades to coarse pitch. It dosent take much 30-40PSI is fine.
...I did this when I was installing my cowl to make sure I had plenty of clearance between the TE of the fat Hartzell blades and the front of the cowl.
Screenshot 2024-11-19 at 4.25.52 PM.png


Spotlight on Classified
…David Halmos Slick Mag FS. 0 time since overhaul
368 posts.
Joined 2010.
Portland, OR area.
Dentist!
Screenshot 2024-11-19 at 9.19.44 AM.png

Estevanb
Screenshot 2024-11-19 at 8.13.02 AM.png

litgourley22
Screenshot 2024-11-19 at 8.14.11 AM.png

n770jl (advertiser offering new smoke tanks)
Screenshot 2024-11-19 at 4.18.17 PM.png

OFF TOPIC:
Screenshot 2024-11-17 at 10.53.36 AM.png

Get your VansAirForce.net Charity Cap!

Please consider donating yearly to help keep this American 1-person pirate ship afloat:

Older issues of the ‘VAF News’ can be found at:

THE VAF LIST (a list of RV-related lists)
 
Last edited:
Back
Top