David Lowe
Active Member
I followed Vans instruction and clecoed the top skin from front to back to the ribs.
But clecoing the bottom part of the skin to the rib from front to back is proving almost impossible. I made the cradle to hold the tank, an on checking it is perfectly shaped to the rib plus 1/16th to allow for the skin. But no matter how hard I try I cannot get the bottom within less than 1/4 inch of the matching holes.
I watched a little YouTube an could not find anyone having the same problem, it is almost like the skin is a little under bent.
I have reread the instructions 10 times an I do not understand what I am doing wrong.
Any ideas or suggestion would be greatly appreciate.
Thanks
David
But clecoing the bottom part of the skin to the rib from front to back is proving almost impossible. I made the cradle to hold the tank, an on checking it is perfectly shaped to the rib plus 1/16th to allow for the skin. But no matter how hard I try I cannot get the bottom within less than 1/4 inch of the matching holes.
I watched a little YouTube an could not find anyone having the same problem, it is almost like the skin is a little under bent.
I have reread the instructions 10 times an I do not understand what I am doing wrong.
Any ideas or suggestion would be greatly appreciate.
Thanks
David