Christopher Murphy
Well Known Member
Today my starter stayed engaged after I released the starter switch. I checked the power lead to the solenoid and the switch was functioning properly. I isolated the solenoid and mechanically jumped the solenoid and the starter continued to turn after I opened the jumper. I then removed the
didode jumper and jumped again and after I opened the jumper the starter motor stopped.
Can failure of the diode jumper cause this? Anyone care to elaborate on the diode jumper that goes from the power coil term to the I term on the solenoid.
thanks
cm
didode jumper and jumped again and after I opened the jumper the starter motor stopped.
Can failure of the diode jumper cause this? Anyone care to elaborate on the diode jumper that goes from the power coil term to the I term on the solenoid.
thanks
cm