I am changing from a Sensenich to a 2-blade Catto. Hub thickness of Catto measures 4 1/4" thick. The plan is to order Vans spinner kit FP-13 so I can sell the Sensenich prop with the spacer and spinner kit if the Catto turns out to be an improvement.
Ken at Vans suggested there could be some finagling with spacers to get the front bulkhead in the right place (apparently wood prop hub thickness varies by manufacturer).
Can anyone who has made this conversion please tell me what was involved fitting the spinner kit to their Catto prop.
Thanks,
LarryT
Ken at Vans suggested there could be some finagling with spacers to get the front bulkhead in the right place (apparently wood prop hub thickness varies by manufacturer).
Can anyone who has made this conversion please tell me what was involved fitting the spinner kit to their Catto prop.
Thanks,
LarryT