Raymo
Well Known Member
After replacing the standard neoprene tubes twice in a year, I decided to upgrade them to something that will last. I'd purchased the liquid rubber that Dan H used for his but wanted an easier solution. CHTs seem to be more even than before (+1 to -1 F vs +10 to -10).
These only took about 30 minutes to cut with a razor knife.
Purchased from Amazon.
Planning the same for the intake tubes to sump and filter inlet next time the lower cowl is off.
These only took about 30 minutes to cut with a razor knife.
Purchased from Amazon.
Planning the same for the intake tubes to sump and filter inlet next time the lower cowl is off.