I removed 2 cylinders for a camshaft inspection on my 1900 hr O360. The pistons were removed from the cylinders so the piston ring positions will no longer be the same if I were to install the cylinders with the same rings. Oil consumption was about a quart per 7-8 hours.
Should I expect higher oil consumption or likely plug fouling problems if I were to install the cylinder/piston with the rings not being in the same postion as before?
Fly it and watch it, or hone and replace rings now?
Jerry Kosirog
Mesa,AZ
RV-7A Firewall Forward
Should I expect higher oil consumption or likely plug fouling problems if I were to install the cylinder/piston with the rings not being in the same postion as before?
Fly it and watch it, or hone and replace rings now?
Jerry Kosirog
Mesa,AZ
RV-7A Firewall Forward