Garmin Shield Termination Pigtail Loop
Curiosity question....
I was reading a GTR-200 manual. The instructions for shield termination are specific; the pigtail must point toward the backshell where it exits the solder sleeve. Pointing away from the backshell and looping around to connect at the backshell bar is not allowed.
So...why?
Curiosity question....
I was reading a GTR-200 manual. The instructions for shield termination are specific; the pigtail must point toward the backshell where it exits the solder sleeve. Pointing away from the backshell and looping around to connect at the backshell bar is not allowed.
So...why?
Last edited: