rv7charlie
Well Known Member
I just purchased a set of used seat belts, and noticed that the way the belts were threaded through the double-slot adjusters wasn't consistent. I wondered which was the correct way to thread them through the adjuster (some had the free end of the belt going 'under'; some 'over'), so I looked it up.
http://www.crowenterprizes.com/Pages/Install.html
I then looked at the belts already in my -4, and they weren't consistent, either. I really don't know if it's a real safety issue, but I suspect that one way may not be as 'right' as the other. Just thought I'd mention it as food for thought.
Charlie
http://www.crowenterprizes.com/Pages/Install.html
I then looked at the belts already in my -4, and they weren't consistent, either. I really don't know if it's a real safety issue, but I suspect that one way may not be as 'right' as the other. Just thought I'd mention it as food for thought.
Charlie
Last edited: