With all the pieces to prime in the fuselage I am trying to do more time efficient prep work. On the empanage I scuffed the parts with the 3M scotch brite pad almost immediately before primming as I didn't want to let the bare aluminum to be exposed for a long time. However, what is the general consensus regarding scuffing prior to priming without running into an oxidation issue? Can I do it the night before?
Before priming I always wipe down with acetone wearing nitrile gloves to prevent the transference of any oils / contaminants. Priming with azko.
Before priming I always wipe down with acetone wearing nitrile gloves to prevent the transference of any oils / contaminants. Priming with azko.