Bayou Bert
Well Known Member
I am almost ready to check out my glareshield mounted AFS AOA,
using the pitot/aoa probe.
In the AFS check sheet for the probe, they ask for two numbers.
recommended approach speed...flaps down and
recommended approach speed...flaps up.
Do I just take the clean and dirty stall speeds and multiply each
by 1.30 to get the recommended approach speeds?
Not sure exactly what to use.
Thanks
using the pitot/aoa probe.
In the AFS check sheet for the probe, they ask for two numbers.
recommended approach speed...flaps down and
recommended approach speed...flaps up.
Do I just take the clean and dirty stall speeds and multiply each
by 1.30 to get the recommended approach speeds?
Not sure exactly what to use.
Thanks