rph142
Well Known Member
Heres my first crack at designing my panel. It will be dual Dynon HDX screens with their suite of panels in the center. The large rectangle is a rough model of the Garmin 175 and the three small rectangles below it are the dynon autopilot disconnect, ident, and dimmer modules. The two large circles on either side of the dynons are vents modeled after steins large vent option. Id like the ability to fly this plane from left or right seat, which necessitates the Pmag switches and push to start button located in the center. The small switch to the right of the start button will be flaps. The last two items that I'm struggling to find a home for are the cabin heat and oil cooler door push pull cables. Throttle and mixture will be mounted in a carbon fiber center console that Im fabricating using 3D printed moulds.