thomasjorgensen
Member
The 3 blade MT prop is quite common on the RV-10, but is anybody running (or thinking of running) a 4 blade? Is the 4 blade MT smaller in diameter than the 3 blade MT?
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
RV-10 4blade prop
- Thread starter thomasjorgensen
- Start date
Space Cadet
Well Known Member
Related...
Thomas, be careful with the 4-blade planning. I was considering one (customer built) and in fact ordered it but realized later it would be very difficult to get lower cowling off with a 4-blade. Already a challenge getting it off with 3 blades. Yes, shorter blades, but not enough. I modeled it up and could not get happy with it- requires pretty big change to lower cowl.
Dwight
Thomas, be careful with the 4-blade planning. I was considering one (customer built) and in fact ordered it but realized later it would be very difficult to get lower cowling off with a 4-blade. Already a challenge getting it off with 3 blades. Yes, shorter blades, but not enough. I modeled it up and could not get happy with it- requires pretty big change to lower cowl.
Dwight
Wayne Gillispie
Well Known Member
Unless it is a very high dollar/high efficiency prop like our military procures you may lose some performance. They are really designed for absorbing lots of power...not for 260 hp. It would look and sound different though.
