Ant CB
Member
I installed a MGL 3 1/4 inch TC-3 and it seems to be okay but when I turn one mag off at a time the CHT readings go bananas. I'm thinking it might be because I ran the probe leads through the same hole in the fire wall as the mag p-leads.
The p-leads are mil spec shielded wire grounded at the mag end etc...
Before I drill new holes in the firewall I'd be interested to hear others experience.
The p-leads are mil spec shielded wire grounded at the mag end etc...
Before I drill new holes in the firewall I'd be interested to hear others experience.