Has anyone put their fuse on the rotisserie at the stage where the tailcone is cleco’d to the fuselage, but no rivets have been set?
We just got it cleco’d today and an initial look at how we will approach riveting made us think we would be able to reach a lot more, if the whole thing could be rotated.
As a side note - how good is this kit!! Not a single jig and we are seeing 0.00 degrees of twist across the fuselage longerons, the main centre spar and the aft deck. Totally astounding. Such a good bit of kit.
We just got it cleco’d today and an initial look at how we will approach riveting made us think we would be able to reach a lot more, if the whole thing could be rotated.
As a side note - how good is this kit!! Not a single jig and we are seeing 0.00 degrees of twist across the fuselage longerons, the main centre spar and the aft deck. Totally astounding. Such a good bit of kit.