lorne green
Well Known Member
Well, After a fair bit of searching I found the perfect colour match to CAD's Leather/Ash (LTHR-1502) swatch I plan on using for my interior. The paint of choice is rattle-can Rust-oleum specialty appliance epoxy. It's a satin finish. It looks like a matte gray (stainless steel look). I was trying to aviod the green/grays or blue/gray hues. I would have perfered something I could throw in my sprayer, but since I'm going with CAD's Aviator interior, there's not going to be too much painted surface showing anyway. The perfered application is to apply to bare (clean/dry) metal. A spray application to a test area which was primed with NAPA 7220 netted excellent results. The instructions do indicate this product should not be applied to previously painted areas. A coating of this product over a sample of Tremclad enamel prooves the Rust-oleum appliance exopy to be a darn good paint stripper! Applied less than three hours ago and seems very scratch and burnish resistant. Touch-ups and partial re-coats are seamless with no signs of demarcation. Rust-oleum sku 020066132453.