Greetings Fellow RV-12'ers.
Just completing Phase 1 testing on N850VH. 14.5 hrs. flying, apx. 20 on the Hobbs. My SkyView touch fuel flow is indicating about 7.5 GPH in cruise, but it's actually only burning less than 5 GPH. Obviously with only one Red Cube, it is only measuring fuel supplied to the engine, not the unused fuel returned to the fuel tank. The Dynon manual says the default K Value is set at 68,000 and to increase it if the GPH is reading too high. Van's says to adjust it up by 10,000.
Question: what is the K Value set at in your RV-12?
Thanks for any responses.
Just completing Phase 1 testing on N850VH. 14.5 hrs. flying, apx. 20 on the Hobbs. My SkyView touch fuel flow is indicating about 7.5 GPH in cruise, but it's actually only burning less than 5 GPH. Obviously with only one Red Cube, it is only measuring fuel supplied to the engine, not the unused fuel returned to the fuel tank. The Dynon manual says the default K Value is set at 68,000 and to increase it if the GPH is reading too high. Van's says to adjust it up by 10,000.
Question: what is the K Value set at in your RV-12?
Thanks for any responses.