Rear overhead light location

[RyanWhite]

Ok any suggestions from finished 10 people that have an opinion on rear light location…. Forward in the aluminum cover or aft of the air vents?

Is it too far aft behind air vents and does your head get in the way of the light?

Headset hangars? Oxygen location?

 

[Richard Connell]

Here’s what I did with mine. Seems fine.
Haven’t really done much night flight with pax. Maybe only once now that I think about it.
The Ox however I can say works very well here. My shortened cannula lives permanently hanging just behind the PIC seat.

 

[dmattmul]

Many options but this seems to work ok and keeps the overhead less crowded. (It's pretty crowded even without oxygen mounted in the overhead)

 

[flywithayres]

Many options but this seems to work ok and keeps the overhead less crowded. (It's pretty crowded even without oxygen mounted in the overhead)

View attachment 110054View attachment 110055View attachment 110056

View attachment 110057View attachment 110058

Thanks for those. I’ve just started the O2 puzzle and may well blatantly copy these locations.

 

[Weaselcop]

Any issues with "kick-ability" while the cannulas are plugged in with those low mounting spots? Or do you just make sure all 02 is unplugged before anybody gets out

 

[rdamazio]

I did something very similar to the other poster above, minus the separate switches:

 

[flywithayres]

I did something very similar to the other poster above, minus the separate switches:

View attachment 111354

I wish I could use the overhead for mine but I don’t think there is enough clearance for the Aithre ports.

 

[3stepdrop]

Ok any suggestions from finished 10 people that have an opinion on rear light location…. Forward in the aluminum cover or aft of the air vents?

Is it too far aft behind air vents and does your head get in the way of the light?

Headset hangars? Oxygen location?

Here's the way mine is done. Not installing O2.